|
|
Fire Trak Ordering and Installation
select one of the following topics:
Download Copies of Order Forms
(back to top)
Ordering Guidelines
- Reveal and Cavity Reveal Profile Order Forms are available upon request.
- Orders are manufactured and shipped from factories in Minnesota and California.
- All orders must be placed on the appropriate Fire Trak Order Form to ensure orders are manufactured to the correct dimensions.
- Filling out order forms completely with correct project, billing, and shipping information will avoid delays in processing or shipping.
- Orders will not be processed without an authorization signature.
(back to top)
Terms and Conditions of Sale
- Prices subject to change
- $75.00 setup fee for orders under 10 pieces combined
- Freight is free on orders over $50,000
- 33% restocking fee on all canceled orders
- NO returns on shipped orders
- Standard track ships in 24 hours from Minnesota
- Material comes in 10' lengths
- Prices F.O.B. Watkins, MN or Los Angeles, CA
- The Fire Trak System is covered by U.S. Patent No.'s 5,471,805 and 5,755,066
(back to top)
Four Basic Fire Trak Profiles
Shadowline designs are the best choice for most applications.
 |
Shadowline
designed for most applications |
 |
Cavity Shadowline
designed for cavity and
shaft walls |
Check with Fire Trak for appropriate Reveal applications.
 |
Reveal
designed for exposed joint |
 |
Cavity Reveal
designed for exposed joint in cavity and shaft walls |
(back to top)
Standard Leg Dimensions
 |
Dim. ‘A’ - 1-1/2” STD - Top Leg - 1” Deflection
Dim. ‘B’ - 1-1/2” STD - Bottom Leg - 1” Deflection
Dim. ‘C’ & ‘D’ - 5/8” STD - Wall Mat’l Thickness - 1 hr.
Dim. ‘C’ & ‘D’ - 1-1/4” STD - Wall Mat’l Thickness - 2 hr.
Dim. ‘E’ - Stud Size
|
| |
Dim ‘A’
- 1-1/2” Standard for 1", 1-1/2", and 2" of deflection
- 2" Standard for deflections exceeding 2"
Dim ‘B’
- Determines how much movement the track will provide
- Typically 1/2” longer than the deflection of range of motion required
- Maximum length is 6-1/2” for 6” of deflection or range of motion
- Most joints are subjected to movement in both directions.
- For example, a joint required to handle 2” of deflection and 1” of extension would have a 3” range of motion.
Dim ‘C’ and ‘D’
- Made to accommodate the wall material thickness
- Standard dimensions are 5/8” for 1 hour, 1-1/4” for 2 hour, and 1-7/8” for 3 hour
- Can be any size and can also be differing sizes (ie. ‘C’ = 5/8” and ‘D’ = 1-1/4”)
Dim ‘E’
- The same as the stud size
|
(back to top)
Leg Dimensions for Varying Movements
(Deflection and/or Extension)
Deflection
- Downward movement of the roof or floor deck
- Joint compression due to dead loads, live loads, snow loads, ect.
Extension
- Upward movement of the roof or floor deck
- Joint opens larger than installed width due to negative air pressure (roof lift) or the deck beneath compressing
Range of Motion
- Both downward (deflection) and upward (extension) movement
- Most joints are subjected to movement in both directions
- For example, a joint required to handle 2” of deflection and 1” of extension would have a 3” range of motion
(back to top)
|
|
