Call Us:
FireTrakRediKlipPosiKlip
RediKlip Details Submittal (PDF)
The ultimate deflection device that effectively replaces double track or slotted track systems.
The Redi Klip provides an innovative and inexpensive clip design that positively attaches steel studs to a track while allowing for structural movement. Easy to install and less expensive than many other systems, the Redi Klip meets all building code requirements, and is U.L. classified for use in most head-of-wall joints rated for up to 2 inches of movement.

  • Redi Klips can replace double track, slotted track, or clip systems in interior or exterior walls.
  • Redi Klips can handle a range of deflections by varying the track depth.
  • Redi Klips effectively lock jamb or king studs at the frame while allowing for deflection.
  • Redi Klips reinforce any stud to a track connection while allowing for deflection.
Key Benefits of the Redi Klip
The Ultimate Deflection Device When compared to other deflection methods, the Redi Klip stands alone. This innovative new clip allows for a range of deflections for both rated and non-rated walls, while positively attaching steel studs to a track. As a cost-effective replacement for double and slotted track systems, the Redi Klip meets all building code requirements and is U.L. classified for use in most head-of-wall joints rated for up to 2 inches of movement.

To install, simply twist the pre-formed clip around the inside return of the steel stud, then push it up to the underside of the track leg and attach with a wafer head framing screw. 2 pre-punched holes and 2 pre-formed clips are designed for ease of installation on either side of a steel stud.
Deflection Capabilities Redi Klips are designed to provide deflection for both rated and non-rated walls.

  • For non-rated walls, Redi Klips provide both deflection and range of motion from 1 to 2 inches.
  • For rated walls, movement is dependent upon fire caulk selected.
Product Specifications Specifications for the Redi Klip include the following:

Short Stud Return (SSR):

Stud Flange Width: 1-1/4”
Stud Return: 3/16”
Typical Stud Gauge: 25, 22, 20

Long Stud Return (LSR):

Stud Flange Width: 1-3/8” to 1-5/8”
Stud Return: 3/8” to 1/2”
Typical Stud Gauge: 16, 14
Installation To install, twist the pre-formed clip around the inside flange of the steel stud and push up to the underside of the deep leg track. Attach the clip to the deep leg track with a wafer head framing screw in the hole farthest from the steel stud.

Redi Klip used in Fire-Rated Condition



Redi Klip used in Non-Rated Condition



Redi Klips can be purchased through your favorite distributor. Please contact us for distributors in your area.
About Us Products Code Compliance Order and Install Contact
Copyright 2008, FireTrak Inc. All Rights Reserved